| |
|
ExSTIK CHLORINE METER & ACCSSORIES
Designed as a simple method to test for Total Chlorine following "Standard Methods for Examination of Water and Waste Water" (4500-CI I; approved by the EPA as an acceptable alternative method for 40 CFR Part 136 wastewater compliance monitoring
|
 |
CL200
ExStik Chlorine Meter
Direct reading of Total chlorine down to 0.01ppm and is unaffected by color or Turbidity of the sample
Features: Direct reading of Total Chlorine provides fast and easy measurements; low detection limit down to 0.01 ppm; wide dynamic range to 10ppm (use dilution method for 10 to 50 ppm); unaffected by sample color or turbidity; automatic electronic calibration; memory stores 15 labeled readings; unique flat surface chlorine electrode eliminates any concerns for clogged junctions or glass breakage; large LCD simultaneously displays ppm of Total Chlorine, Temperature, and analog bargraph indicator; waterproof to IP67; complete with meter and flat surface Chlorine electrode, EXTab reagent tablets (50 tests), protective sensor cap, sample cup wit cap, four 1.5V button batteries, and 48" neckstrap. Dimensions: 1.4" x 6.8" x 1.6". Weight: 3.85 oz. |
| |
| |
|
 |
|
EC500
ExStik II Waterproof pH/Conductivity Meter
Combination rugged flat surface pH electrode with autoranging high accuracy Conductivity cell measures Conductivity, TDS, Salinity, pH, and Temperature
Features: 9 units of measure: pH, us, ms, ppm, ppt, mg/L, g/L, degrees C, and degrees F; analog batgraph indicates trends; internal memory stores up to 25 labeled readings for easy recall; adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio; RENEW feature warns to check calibration, but allows continued use; Data Hold, Auto Power Off, Low battery indicator, waterproof to IP67; complete with electrode, protective sensor cap, sample cup with cap, polishing paper, four 1.5V SR44W batteries, and 48" neckstrap. Order Conductivity standards separately. Dimensions: 1.4" x 7.3" x 1.6". Weight: 3.8 oz. |
| |
 |
DO600
ExStik II Waterproof Dissolved Oxygen Meter
Easy to replace screw on membrane cap with optional extension cables
Features: Oxygen level displayed as % Saturation or Concentration (mg/L [ppm]); adjustable Salinity Compensation fro 0 to 50 ppt; analog bargraph indicates trends; memory stores up to 25 data sets with DO and Temperature readings; self calibration on power up; Data Hold, Auto Power Off, Low battery indicator; waterproof to IP67; complete with DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 1.5V SR44W batteries, and 48" neckstrap. Optional 3 ft or 16 ft extension cables are available. Dimensions: 1.4" x 6.9" x 1.6". Weight: 3.8 oz. |
| |
|
 |
DO610
ExStik II DO/pH/conductivity Kit
User friendly kit economically measures 6 parameters supporting water, wastewater, groundwater, aquaculture and fisheries professionals
Kit includes: EC500 pH/Conductivity ExStik II meter with combination high accuracy multi-ranging Conductivity sensor for Conductivity, TDS, Salinity, pH, and Temperature measurements; DO600 Dissolved Oxygen ExStik II meter with electrode, replacement membrane cap, electrolyte, and polishing paper.
Accessories Included: sample pH buffers--single use pouches for pH4, pH7, pH10, and rinse solution; weighted base with 2 cups and caps, 1.5V SR44W batteries and neckstrap with each meter, and carrying case. |
| |
|
To place your order please call
(919) 734-3221 or (800) 672-4708 |
| |
|
| |
|
| |
|
| |
|
|
